Flat Sawing

Flat sawing is typically used to perform precise cuts on flat surfaces such as roads, bridges, slab on grade, and suspended floor slabs. Flat sawing is also used to cut control joints on green concrete. Donley Concrete Cutting Company has the capability to saw up to 30” deep. We also have a wide variety of gas, diesel, propane, and electric saws to use based on the job application.
View the Flat Sawing Page >>>

Core Drilling

Core drilling is a process used to create precise round holes in both horizontal and vertical surfaces. Common applications for core drilling may include test cores, dowels, anchors, and penetrations for plumbing, electrical, and HVAC. Donley Concrete Cutting Company can drill ½” diameter to 60” diameter holes with unlimited drilling depth. Donley offers various core drilling equipment based on the job requirements. Depending on the application, core drilling can be electric, hydraulic hand held or surface mounted. Core drilling can be done vertically, horizontally, angled, or upside down.
View the Core Drilling Page >>>

Wall Sawing

Wall sawing utilizes hydraulic driven equipment mounted to a track used to cut precise openings and cuts on both vertical and horizontal surfaces as well as round structures. Wall sawing is commonly used to create openings for windows, doors, louvers, and ducts. Donley Concrete Cutting Company is capable of sawing up to 30” of depth from one side and also has the capability to saw flush, upside down, and angled. Most jobs can be performed using hydraulic power generated from the truck; however portable electric units can be used when truck access is not available.

View the Wall Sawing Page >>>

Curb Sawing

Donley Concrete Cutting Company utilizes curb sawing trucks for residential and commercial curbs to be cut in for new approaches as well as handicap ramps. This equipment can also be used on retaining walls and parapet walls when truck access is available.
View the Curb Sawing Page >>>

Ground Penetrating Radar (GPR)

Donley Concrete Cutting Company offers Ground Penetrating Radar. GPR is a non destructive inspection method to view and locate components directly below and within concrete and other materials. Using radar pulses to image subsurface, GPR can locate and verify depth and location.
View the GPR Page >>>

Wire Sawing

Wire sawing is a process used to cut thick materials that are either too thick or cannot accommodate traditional sawing methods. Wire sawing can be used to create both round and square openings with unlimited depth. Common applications for wire sawing include walls, slabs, piers, towers, foundations, and bridges. Donley Concrete Cutting Company offers experienced and specially trained operators for this method of sawing.
View the Wire Sawing Page >>>

Corrective Diamond Grinding & Grooving

Donley Concrete Cutting Company has a PC4500 Grinder as well as a PC150 Groover/Grinder. With this equipment we can restore pavement by removing bumps and uneven surfaces. We can also install grooves for traction in pavement. These services are available for hourly or contracted work.
View the Corrective Diamond Grinding & Grooving Page >>>

High Speed Profiler

Our High Speed Profiler allows for quick and accurate measurements of the longitudinal profile of roadway services. With this machine, we can collect and analyze data to reveal areas of localized and lot roughness. Donley Concrete Cutting Company’s profilograph operators are all certified by the Ohio Department of Transportation and National Highway Institute.

See ODOT website to view operator certifications.
View the High Speed Profiler Page >>>